Skip to main content
Skip table of contents

Wireless Room Thermostat (B) Factory Reset

This article is an excerpt from the Genius Hub Doctor, which is built into the App.

These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.

To access the Doctor, click here

Solution ID: 7654

Step 1

Factory resetting a device removes it from any Genius Hub and removes any custom settings. It does not require a Genius Hub to power powered on/in communications range.

Ensure that the Wireless Room Thermostat has working batteries installed.


Step 2

Remove the Wireless Room Thermostat from the wall by loosening the 2 screws on the underside of the Wireless Room Thermostat. This requires a flat bladed screwdriver.


Step 3

On the back of the Wireless Room Thermostat behind the wall mounting plate, there is a row of 8 white DIP switches.

Put switch 1 (the left most switch), to the UP (on) position.

Turn over the Wireless Room Thermostat and rotate the dial on the front of the Wireless Room Thermostat, until 'P' is displayed on the LCD screen.

Press the dial twice in succession.

If successful, the LCD screen will read 'PP'.

Click here to add the Wireless Room Thermostat to this Genius Hub

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.