Skip to main content
Skip table of contents

In Wall Meter Unassign Duplicate

This article is an excerpt from the Genius Hub Doctor, which is built into the App.

These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.

To access the Doctor, click here

Solution ID: 7310

Step 1

The Range Extender has been assigned to 2 or more zones. This will stop the Range Extender working properly and may mean rooms heat unexpectedly or do not heat up at all.


Step 2

Select the Range Extender which has been assigned incorrectly.

The Doctor will ask you to select the relevant device


Step 3

The Range Extender channel is assigned to the following rooms. Please select the one room you wish to control with this channel.

The Doctor will ask you to select a zone


Step 4

The Genius Hub will now unassign the Range Extender channel from all zones.

The Doctor will remove the device from the zone


Step 5

The Genius Hub will now assign the Range Extender channel to the correct zone.

The Doctor will now assign the device to a zone

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.