Skip to main content
Skip table of contents

Smart Plug (E) Exclude

This article is an excerpt from the Genius Hub Doctor, which is built into the App.

These instructions are provided so that the step-by-step information is available to users, but please note that these actions should generally be carried out whilst using the Doctor.

To access the Doctor, click here

Solution ID: 7252

Step 1

To remove the Smart Plug from the system, it needs to be powered on and in range of the Genius Hub.

To add the device, ideally this is within direct range of the Genius Hub (either in the same room as each other, or adjacent rooms).

If the devices are not close enough together:

1. Plug the Smart Plug into a power socket in the same room as the Genius Hub

2. Move the Genius Hub closer to the Smart Plug. The Genius Hub must have power and an Internet connection. This can be done by:

a) Using a long Ethernet cable
b) Plugging the Hub into a different Ethernet switch
c) Using a Power Line Ethernet adaptor or WiFi booster which has an Ethernet port ( see this link for how to connect the hub with a power-line Ethernet adaptor )

Alternatively, click here, if the device has failed/is no longer in the property


Step 2

Now the Genius Hub needs to get ready to remove the device.

The Doctor will remove the device


Step 3

Press the clear red button 3 times in within 1.5 seconds.

The red light will being to flash when the device has excluded successfully.


The Doctor will communicate with the device


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.