Device communication time

The battery powered devices are programmed to communicate with the Genius Hub on a schedule (wake-up intervals), or if there is a significant change in temperature, or if occupancy is detected.

The time interval for each device to check into the Genius Hub is:

  • Wireless Radiator Valve (DA-WRV-E) = 10 min
    https://www.geniushub.co.uk/wp-content/uploads/confluence/img/DA-WRV-E_front.png

  • Genius Radiator Valve = 7.5 min
    https://www.geniushub.co.uk/wp-content/uploads/confluence/img/DA-WRV-C_front.png

  • Wireless Room Sensor / Wireless Motion Sensor = 30 min 
    https://www.geniushub.co.uk/wp-content/uploads/confluence/img/PH-WRS-B_front.png OR  https://www.geniushub.co.uk/wp-content/uploads/confluence/img/PH-WMS-B_Front.png

  • Wireless Room Thermostat = 30 minutes
    https://www.geniushub.co.uk/wp-content/uploads/confluence/img/HI-WRT-D_front.png

  • Genius Room Thermostat = 10 min
    https://www.geniushub.co.uk/wp-content/uploads/confluence/img/DA-WRT-C_front.png OR  https://www.geniushub.co.uk/wp-content/uploads/confluence/img/HO-WRT-B_tight.png


If your device is not displaying this time on the Devices page, 'Configure' the device from the Devices page. This will send the correct parameters to the device, over the next hour.

https://www.geniushub.co.uk/wp-content/uploads/confluence/img/devices_sub-menu.png

Related Information: