If you place multiple devices into the same zone on the app the following will happen:
-
Multiple
Wireless Radiator Valves
-
The measured temperature is averaged between all of the valves (the valves still control to the temperature that the measure locally to them: How the Genius Radiator Valve controls the temperature accurately).
-
If the target temperature is changed on one valve this will apply to all valves in that zone.
-
-
Adding in a
Wireless Room Sensor
-
The measured temperature is averaged between all of the devices in the zone (the valves and the room sensor/s).
-
If the target temperature is changed on one valve this will apply to all valves in that zone.
-
The triggers from the room sensor are used by the zone.
-
-
Adding in a
Wireless Room Thermostat
-
The measured temperature is averaged between all of the devices in the zone (the valves, the room sensor/s and the room thermostat/s).
-
If the target temperature is changed on one valve or the room thermostat this will apply to all valves in that zone.
-
The triggers from the room sensor are used by the zone.
-
A modification will be made to the system where you will be able to select which device the system will use as a reference temperature for the zone (rather than averaging all of the temperatures) but a release date for this has not been set yet.
Related Information: