We have not officially released electric underfloor heating (UFH), so customers who have electric UFH have 2 options:
1. Install the Electric Switch and Heatmiser DS1-E (from any good electric underfloor heating wholesaler). Genius will control the heating in the room via the Electric Switch and either a Room Sensor/Room Thermostat and the DS1-E will limit the floor heating to ensure that it doesn't overheat. You can then configure the DS1-E so that it only uses the floor probe and this can be set to a limit of 20º, 28º or 40º to stop the floor getting too warm.
Here is a link for more information on how to install an Electric Switch and here is the wiring diagram.
2. Purchase a HeatMat TPS-30 (from any good electric underfloor heating wholesaler), and a Single Channel Receiver from Genius. The Single Channel Receiver will be wired into the setback terminals on the TPS-30 and the TPS-30 with its own floor probe will control the electric underfloor heating.
This means on the Heat Genius app you can set the times that you want the temperature of the room to be at the heated temperature and the times that you want the room to be at the setback temperature. The temperature of the room will need to be set on the TPS-30 display itself. When you go away on holiday and want to turn the electric underfloor heating off you will need to turn it off on the screen of the TPS-30.
- All wiring must be in accordance with the current I.E.E. (BS 7671) Wiring Regulations.
- The Heatmiser DS1-E and the Electric Switch can be placed either inside or outside the bathroom.If the Heatmiser DS1-E and the Electric Switch will be placed inside the bathroom it needs to comply with the wiring regulations in the UK please see this example.
- The Heatmiser DS1-E and the Electric Switch can be placed at any height above the floor inside or outside the bathroom.
- Electric devices in a bathroom or wet room location