The My House page

When you are logged in and have finished the tour, the first screen you will see is the My House page. This is an overview of your system and you can access any of your zones from this page. 

• To access the schedule for any of your zones, click on the respective zone tile. 
• To return to this page at any time, just click on the My House icon at the top-left of the screen.

Your zones

The tiles provide a quick summary of each of your zones:

<image of a tile>

• When the tile is blue, the zone is up to temperature and is not calling for heat. When the tile is orange, the zone is trying to heat up and so calling for heat (or on if it is an On/Off room). 
• The mode icon shows the current heating mode for the zone. 
• The temperatures are made up of 2 sections:

1. The measured temperature: This is the current temperature in the zone, and is displayed in any room where the devices in the zone feed the temperature back to the app (such as zones with a Room Sensor or Thermostat).
2. The set temperature: The temperature the zone is currently controlling to. 

• The pre-heat symbol will be lit up when the zone is heating due to the pre-heat settings. For more information on pre-heat, please see the later chapter.
• The occupancy symbol shows when occupancy is detected in a zone. For more information on what the occupancy symbol means, see the zone details chapter.
  
  • In On/Off rooms, only the current state of the devices in that room is displayed.

To view a zone in more detail, click on that zone's tile.

Quick action bar

To carry out an action that which affects a number of zones you can use the quick actions which are located at the bottom of the screen. These actions do not affect On/Off zone, to affect these zones go to the respective zone and change the mode to Override or Off.

<image of quick actions>

• The Override action allows you to override multiple rooms to the same temperature and to the same time, in one action. To override zones from the My House page:
  
  1. Select which zones you would like to override, then click Next. You can choose just one zone or multiple zones. To select all of the zones, click on the link at the top of the list. check_me
  2. Select the temperature to you wish to set in the selected zones, and click Next. This temperature can be higher or lower than the schedules temperature in the zone, so you can use this feature to turn the heating off early if you are leaving the house earlier than usual.
  3. Choose the how long the override is to affect the selected zones, and click Finish. This can be set from just 5 minutes to 24 hours, and so can be used so give the room a boost on those colder days or turn the heating off if you are going out for the day.
• The Restore action cancels either the Override or the Off action which is set in the zones and reverts the selected zones back to their previous mode. This means that if you turn your heating to 'Off' over the Summer, you can just click 'Restore' to put your heating back on for the Winter.
• The Off action turns all of your heating zones to Off mode.

More information

Zone list

On a tablet or computer all of the zones are displayed as a list on the left hand side of the screen. These give you a quick way to navigate between your zones and they also show a quick summary similar to the tiles:

<image of zone list>

• The left hand indicator shows whether the zone is requesting heat. If the indicator is blue, the zone is up to temperature and not calling for heat. When the vertical line is orange, the zone is trying to heat up and so calling for heat (or on if it is an On/Off room). 
• The mode icon shows the current heating mode for the zone. 
• For zones with a measured temperature, the current temperature of the zone is displayed on the zone list. 
• The pre-heat symbol will be lit up when the zone is heating due to the pre-heat settings. For more information on pre-heat, please see the later chapter.
• The occupancy symbol shows when occupancy is detected in a zone. check_me

App menu

From the My House or any of the zone pages you can access the main menu found as button at the top right of the app.

<image of My House with menu open and button highlighted>

From the menu you can access the following options:

• Your username: For more information, see the chapter 'Making the system your own'.
• Settings: 
• Manual: Access this manual from within the app.
• Feedback: For more information, see the chapter 'Troubleshooting and issues'.
• About: Contains technical information about the platform the device is being ran on and the version of the app you are using.
• Weather: Shows the current weather data for the registered post code. This is the same weather data that is used by the app for some features.

Issues tile

If there is an error on the system, such as a device has a low battery a new tile will appear at the top of the My House page to inform you of this.

<image of issues tile>

To resolve the issue:

1. Click on the Issues tile and it will list any outstanding issues for your system.
2. Click on the error or warning and you will be taken to the Wizard which will guide you through how to fix the problem.

My House sub-menu

On the right hand side of the 'Zones' title bar is the My House sub-menu. Many pages have their own sub-menu and these provide options to customise how information is displayed on the page or access other pages related to the one you are currently viewing.

<image of my house sub-menu, both the icon and the sub-menu with numbers>

The options on the My House sub-menu are:

• My House Style
• Create New Zone
• My House Setup

My House Style

This option select how your zones are displayed on the My House page between tiles (as seen above) and Timerbars.

<image of My House with Timerbars>

• Timerbars show the today's schedule for each of the rooms, along with the same information as you see when using tiles, such as the measured temperature, mode icon and whether occupancy is detected in this zone. The vertical line to the left hand side of the timerbar is the indicator as to whether the zone is calling for heat.
• To see more detail about any of your zones, click on the respective row.
• The current time, and therefore which part of the schedule is active, is indicated by the vertical line on the timerbar, which travels left to right as the day progresses.

Create New Zone

To expand your system to control more devices, you'll start by creating a new zone to add the devices to.

<image of the Create New Zone dialog>

To create a new zone:

1. Click on the 'Create New Zone' in the My House sub-menu
2. Enter the name of the zone you are creating
3. Select the type of control you require, such as On/Off if you are adding a Smart Plug, or Radiator if you are controlling a new room with Genius Valves. 
4. Click 'Create'

My House Setup

Setup pages allow you to change the configuration of a zone, such as its name, what devices are assigned to it and enable extra features such as pre-heating. For more information, please see the chapter on Zone Setup. check_me