...
Pre-heating (Radiator and Underfloor only)Anchor PreHeating PreHeating
The Genius Hub can automatically calculate the pre-heat duration for a chosen room, so that the room will reach the set temperature at the start of the ‘heating period’, rather than just starting to heat up at that time. Your Genius Hub is adaptive, so it's always learning from the temperature recorded by each room sensor. Using the local weather data and the heating history for each room, it will constantly adjust the pre-heat duration as the weather changes. This default setting for pre-heating is disabled.
| Note |
|---|
The Pre-heating options are only available in radiator and wet underfloor type zones which have a temperature measuring device (such as a Room Sensor or Room Thermostat) assigned to the zone. |
When pre-heating is disabled, the system will heat the rooms only during heating periods. For example, if you set a heating period between 14:00 and 16:00 the system will start to heat the room at 14:00.
...