The following explains how to re-add an existing Wireless Room Thermostat to a Genius Hub.
If you have an existing Room Thermostat it will need to be factory reset before it is connected to a Genius Hub.
First remove the thermostat from its backplate.
Make sure that the Room Thermostat is within 2 meters (line of sight) of the Genius Hub (the part that is connected to your internet router).
Turn the thermostat over, so the screen is facing away from you and insert new batteries.
Now the hub needs to get ready to add the device.
On the app tap on Menu, then Settings and then Devices. Now tap on 'Include device' and follow the prompts on the app.Turn the thermostat back over so the screen is facing you.
Press the top left button and it will quickly flash green and the antenna will appear on the screen.
The green light will stop flashing when the device has included successfully.
On success, the Room Thermostat has been assigned a number, write this number on the side of the device.
The success or failure of the inclusion will be displayed on the app.*** Verification Test to ensure new node ID & hash = WRT-C hash ***
Re-attach the Room Thermostat to a wall. See Tips of locating the Room Thermostat correctly.
Now you need to finish the steps here and then add the Room Thermostat to a corresponding zone on the app.
Assign the Room Thermostat to a zone. See Chapter 13 of the Manual for information on assigning your device/channel to a zone.*** Assign device to zone ***
You also need to delete the old Room Thermostat from the list of devices as this no longer exists.
Remove the old Thermostat from the system. See Chapter 10 of the Manual for information on removing the dead node.*** Remove the dead node, using the node ID passed through from the start of the wizard if possible ***
Do not unplug the Genius Hub for at least 30 minutes so the hub has time to save the new settings.
Tips for locating the Room Thermostat correctly:
• At chest height (so it measures the correct temperature).
• On an internal wall (so it measures the correct temperature and is not affected by being on a cold surface).
• Not next to any direct sources of heat (so that it measures the temperature of the zone and is not affected immediately by a heat source in the room).