...
- Navigate to the zone you would like to configure
- Click on the zone sub-menu
- Click on the My House Setup or Zone Setup page
Setup options
Zone Name
If you want to change the name of a zone, just type in the new name in the textbox and the app will update the name on the app. This setting is displayed in all zones except for the My House setup page.
Primary Zone
This option determines whether the zone can request the boiler to switch on when it requires heat. The default setting for a zone is for Primary Zone to be enabled.
...
This setting is only displayed in radiator type rooms.
Manual override - check_me
In many of your zones the devices for that zone will have physical controls you can use to adjust the heating, such as the buttons on a Radiator Valve. From the zone setup pages, you can choose whether these buttons should be permitted to affect the heating in the zone, and how they affect the heating. The default setting for a zone is ... check_me
...
This setting is only displayed in radiator and underfloor zones which have a device which feed the measured temperature back to the app. check_me
Temperature offset
In some situations the Radiator Valves and Room Sensors can detect a different temperature to one another, for example if the Room Sensor in placed on an external wall it will misread the temperature due to the cool wall. When this happens and it is not feasible to move the Room Sensor due to the layout of the room, the devices can be manually offset so they read the same temperature.
...
This setting is displayed in radiator and underfloor zones.
Zone reactivity settings
For zones with a Room Sensor, you can change the reactivity settings of Footprint mode from here. the 3 changes you can make are:
...
This setting is displayed in any radiator room which has a Room Sensor. check_me
Zone devices
This shows a list of devices assigned to the room. For example a radiator zone will have 1 or more Radiator Valves and likely a Room Sensor. These will be displayed in the list of devices, along with a button to remove the device.
...
| Info |
|---|
This will only remove the device from the zone, the device will remain linked to your system so it can be assigned to another zone. |
Quick action bar
The more commonly performed tasks on the setup pages are located on the action bar found at the bottom of the screen.
...