Page History

...

• On the Room Thermostat (DA-WRT-C) you can set the temperature of the override from the device. To override a zone from the thermostat:
  1. Press the up or down button until the desired temperature is reached. The zone will now override to the set temperature for the duration set on the app.
• On the Room Thermostat (DA-WRT-B) you can set the temperature of the override from the device. To override a zone from the thermostat:
  1. Rotate the dial until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
• On a Radiator Valve (DA-WRV-C, DA-WRV-B, or DA-WRV-A) you can set the temperature of the override from the device. To override a zone from the Radiator Valve:
  1. Press the up or down button until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
• On the Single Channel Receiver (HO-SCR-C) you can trigger an from the device. To override a zone from the receiver unit:
  1. Press the On (top) button. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
• On the Dual Channel Receiver (HO-DCR-C) you can trigger an from the device. To override a zone from the receiver unit:
  1. Check the door panel to see which of the white buttons relates to the zone you have chosen to override.
  2. Press both the correct white button and the green button at the same time. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
• On the Electric Switch (HO-ESW-D) you can trigger an override from the device. To override a zone from the Electric Switch:
  1. Press the button at the bottom right hand corner of the receiver unit. The system will use the override duration set on the app for this zone, and override to the last used override temperature/setting.
• On the Smart Plug (PH-PLG-C or PO-PLG-B) you can trigger an from the device. To override a zone from the receiver unit:
  1. When the plug is off, press the button in the middle of the plug. The system will use the override duration on the app for this zone, and override to the last used override temperature/setting.

If you have a device in the My House, such as a Receiver unit controlling your heating or a Thermostat reporting the temperature to My House this can be used to affect all of your Radiator and Underfloor rooms with one manual override. 

• For a Single or Dual Channel Receiver you can press the respective on button (as detailed above) and all of your Radiator and Underfloor rooms will override to the temperature and duration set in My House.
• For a Thermostat you can adjust the temperature (as detailed above) and all of your Radiator and Underfloor rooms will override to the selected temperature on the device and to the duration set in My House.

...