...
This setting is only displayed in radiator type rooms.
Manual override - check_me
...
In many of your zones the devices for that zone will have physical controls you can use to adjust the heating, such as the buttons on a Radiator Valve. From the zone setup pages, you can choose whether these buttons should be permitted to affect the heating in the zone, and how they affect the heating. The default setting for a zone is ... check_me
...
- On the Single Channel Receiver (HO-SCR-C) you can trigger an from the device. To override a zone ON from the receiver unit:
- Press the On (top) button. The system will use the override duration and override temperature set on the app for this zone.
- To override a zone OFF from the receiver unit:
- Press the Off (middle) button. The system will use the override duration set on the app for this zone and override to the Off setting for this zone type.
- <image of HO-SCR-C, buttons highlighted>
- On the Dual Channel Receiver (HO-DCR-C) you can trigger an from the device. To override a zone ON from the receiver unit:
- Check the door panel to see which of the white buttons relates to the zone you have chosen to override.
- Press both the correct white button and the green button at the same time. The system will use the override duration and override temperature set on the app for this zone.
- To override a zone OFF from the receiver unit:
- Check the door panel to see which of the white buttons relates to the zone you have chosen to override.
- Press both the correct white button and the red button at the same time. The system will use the override duration set on the app for this zone and override to the Off setting for this zone type.
- <image of HO-CCR-C, door open, white & green buttons highlighted>
...
- On the Smart Plug (PH-PLG-C or PO-PLG-B) you can trigger an from the device. To override a zone ON from the receiver unit:
- Press When the plug is off, press the button at the bottom left hand corner in the middle of the receiver unitplug. The system will use the override duration and override temperature set on the app for this zone.
- To override a zone OFF from the receiver unit:
- When the plug is on, press the button in the middle of the plug. The system will use the override duration set on the app for this zone and override to the Off setting for this zone type.
- <image of PH-PLG-C, button highlighted> <image of HO-ESW-D, buttons highlighted> check_me - all of above
| Info |
|---|
In an On/Off zone, you can override the zone, but only by switching it On or Off. The On and Off buttons on the Single and Dual Channel Receivers and the buttons on the Electric Switch and Smart Plugs can be used to override their respective zones. |
...