Solution id | ||||
---|---|---|---|---|
|
Troubleshooting step |
---|
The batteries are flat in |
...
the Genius Room Sensor and the sensor will have stopped working altogether. First, remove the front cover of the |
...
Genius Room Sensor by placing a tool (such as a flat-bladed screwdriver) into the top of the sensor until you hear a click. This will release the catch. Use your nails or the screwdriver to pull the white (front) of the room sensor away from the clear (back) and allow the cover to swing down (be careful not to pull the sensor off the wall). The front is hinged at the bottom. |
Troubleshooting step |
---|
Remove the CR123 battery by pushing it lightly against the spring. Wait 30 seconds before putting in the new battery. |
Troubleshooting step |
---|
Put in the new CR123 battery. The light will flash once every second for 30 seconds. |
Troubleshooting step | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Select the Room Sensor with the flat battery
|
Troubleshooting step | |||||
---|---|---|---|---|---|
|
|
...
|
Troubleshooting step |
---|
Wake the device by pressing the black button at the top left of the device once. |
Troubleshooting step | |||||
---|---|---|---|---|---|
|
...
|
Troubleshooting step |
---|
To return the cover click it in at the bottom of the device and allow it to hinge up until there is a click as the top locks the cover in place. |