...
The following explains how to apply an offset temperature to the Wireless Genius Radiator Valve (Genius Valve).
Troubleshooting step |
---|
Sometimes a Genius Radiator Valve can think the room it is situated in is warmer than it is, or indeed cooler, which usually happens when the valve is located in either a draughty or a tight space i.e. behind a heavy curtain, behind a large piece of furniture or close to a doorway. The Valve Hidden Offset feature is one way to deal with any discrepancies that you may have noticed; for example if you have multiple valves in the same room, you may have noticed that one radiator turns off sooner than another which could be a cause of where the valve is located; or you may have noticed that the room never appears to reach the target temperature you set on the app. |
Troubleshooting step |
---|
First locate the radiator valve in the room you want to adjust. |
...
|
...
Troubleshooting step |
---|
In order to adjust the temperature that the troublesome valve is controlling to you can apply |
...
an 'hidden offset’ to it. • To |
...
- Go to the 'Menu' then 'Settings'
- Select 'Devices'
- Select the Genius Valve in the room you want to adjust
- Go to 'Valve Hidden Offset'
- Set your adjustment as follows
- To make the radiator heat up more put a plus value in
...
increase the heat provided by the Genius Radiator Valve (if the valve is under-reading the temperature) put in a larger value (move the slider to the right). • To reduce the heat provided by the Genius Radiator Valve (if the valve is over-reading the temperature) put in a negative value (move the slider to the left).
|
- To reduce the heat put a minus value in
...
adjustment, you can look at |
...
the charts for that zone; the difference between the red line (measured temperature)and the green line (set temperature) is the amount you want to apply. |
...
set temperature), |
...
the valve is over-reading the temperature and you will want to move the slider left. • If the red line ( |
...
measured temperature) is below the green |
...
line ( |
...
set temperature), the valve is under-reading the temperature and you |
...
will want to move the slider right.
|
Troubleshooting step | |||||
---|---|---|---|---|---|
Wake up the device by short pressing one of the arrow buttons once.
Note: If you have multiple Genius Radiator Valves |
...
in one room, you can select individual adjustments for each radiator.
|