Versions Compared

Old Version 6

changes.mady.by.user Matthew Hart

Saved on

compared with

New Version 7

changes.mady.by.user Matthew Hart

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Troubleshooting step


Doctor macro placeholder
MacroNamecreate-room

See the 'Create new zone' section under Chapter 13 of the Manual for guidance on how to create a new zone.

 


Doctor custom buttons
StartStepIndex3

...

Troubleshooting step


Doctor macro placeholder
Optionsnode-index="0"
MacroNameassign-node

To ensure check the device has been correctly assigned open the zone's page, tap "Zone Setup" under the menu and check the channel is listed under "Zone Devices".

 


Doctor custom buttons
StartStepIndex3

 

...




Troubleshooting step

Install the Genius Radiator Valve onto the radiator.• This video shoes

Image Added

Here is a video to show you how to remove
and refit the
a Genius Radiator Valve
.

 


Types of valve adapter:

Standard M30

• Screw the short adapter onto the valve body tight (the metal part that the water flows through).

• Make sure that the valve has a flashing 'M' on the screen.

• Screw the Genius Radiator Valve onto the TRV adaptor tight.

• Long press the middle /o\ button until the valve starts to buzz and 'M' stops flashing.

Danfoss RA

• Push the tall adapter on the TRV body and use the hex key to tighten the adapter until the adaptor starts to distort slightly.

• Make sure that the valve has a flashing 'M' on the screen.

• Screw the Genius Radiator Valve onto the TRV adaptor.

• Long press the middle /o\ button until the valve starts to buzz and 'M' stops flashing.

...