Power on the Electric Switch within direct range of the Genius Hub (either in the same room as each other, or adjacent rooms). If the devices are not close enough together, then use the following steps: 1. Move the Genius Hub closer to the Single Channel Receiver Electric Switch. The Genius Hub must have power and an Internet connection. This can be done by: a) Use a long Ethernet cable b) Plug the Hub into a different Ethernet switch c) Use a Power Line Ethernet adapter or WiFi booster which has an Ethernet port 2. Temporarily wire the Single Channel Receiver Electric Switch to a plug and short piece of flex so you can power on the Single Channel Receiver Electric Switch next to the Genius Hub. It is recommended that this is done by an electrician/heating engineer. Remove the white front cover from the Electric Switch using a flat bladed screwdriver. Push the screwdriver into the slot on the underside of the cover and flex the slot out slightly to release the white cover.
|