The Powered Room Thermostat normally displays the measured temperature under normal operation. However as there is a screen, we choose to display device problems on the screen of the device.
If you see a code on the thermostat that is not a temperature then there may be a problem.
The error codes are as follows:
The Powered Room Thermostat shows the 'Er4' floor sensor error when the floor probe has:
To fix this, power down the Powered Room Thermostat, and check the connection to the floor probe. It has likely no longer got a good connection and the fitting needs to be tightened up. If this doesn't fix the problem, it is possible the floor probe has become damaged and so needs to be replaced.
A floor sensor is mandatory. If you do not wish to use a floor sensor, install the link provided between the floor sensor terminals. |
The Powered Room Thermostat shows the 'Er5' external sensor error when the external sensor has:
The external sensor is not part of the trial of the Powered Room Thermostat and so this error should not be shown. Should it occur, please contact Genius Hub Technical Support |