Unlike wet underfloor heating, electric underfloor heating cannot be controlled with just an Electric Switch and a Room Sensor/Thermostat. This is due to the temperature of wet underfloor heating being limited by the boiler output temperature, and a mixing valve on the manifold. For Electric Underfloor heating, should it be left on constantly, it will continue to heat up the floor, and may damage the surface or injure the occupant of the room. Therefore a floor-limiting thermostat must be installed to stop the floor from getting too hot.

The Genius Hub system can control these types of underfloor to a schedule measuring against the air temperature, whilst providing floor temperature limiting. This is done by using the Powered Room Thermostat. It is a wired thermostat which can control up to 16A (230V) of electric underfloor heating, or a zone valve/circulation pump for wet underfloor heating. As well as an internal air sensor, a floor sensor can be purchased (separately) to enable the floor limiting feature. The floor limit is set to 28°C.

On the app, you can set the schedule to control the air temperature throughout the day, and the Powered Room Thermostat retains local control of the floor limiting, to ensure it doesn't overheat should there be a communication problem between the thermostat and the Genius Hub.