How uncontrolled radiators heat
If a radiator does not have a Genius Radiator Valve on it and if left with a manual valve or a TRV (Thermostatic Radiator Valve) then it will come on whenever the boiler runs.
The Genius Radiator Valves allow you to set times of the day when you want a radiator to be on and off, but it is important to think about how they turn the radiators off as well as on. This sounds like the opposite logic, but if you only control one radiator on a heating circuit with a Genius Radiator Valve, then each time that radiator calls for heat the whole heating circuit will become hot and the controlled radiator will control to the temperature you set, but all of the other uncontrolled radiators (where you leave the existing valves) on the same heating circuit will also turn on unless you have manually turned them off.
Heating only the uncontrolled radiators
When you want to control the boiler and bring that on, but do not want any of the rooms that have the wireless valves to Genius Radiator Valves to come on, you need to create a new zone on the app and we usually suggest calling this 'Rest of House'. You can use this new 'Rest of House' zone to control the other rooms in your home house that do not not have the wireless valves and it controls Genius Radiator Valves and this zone will control to the temperature reported from the house thermostat. When you in My House.
If you were to schedule 'Rest of House' to come on on its own , (and none of the other zones on the app are calling for heat), the boiler will come on but , all of the wireless valves in the Genius Radiator Valves in the home will stay turned off, meaning that the only radiators that will warm up are those that you are not controlling with the wireless valves Genius Radiator Valves.
Step-by-step guide
To do this,:
- Go to the My House page (click the 'home' icon at the top left of the app).
- Click on the My House sub-menu (the three lines ••• on the top right of the screen), then setup.'Create New Zone'.
- Type Click new room at the top, and type in the name 'Rest of house'. Leave it as 'Radiator Control' and then click on OK'Create'.
-
Go back to the 'Home' screen by clicking on the home icon in the top left of the app. You will now have a new room at the bottom of the list where you can set up timers for the
boiler. Because there are no electronic valves in this 'Rest of house' room, when you turn the 'Rest of house' on it will turn the boiler on and control to the temperature reported by the house thermostat in the hallway, but it won't bring on any of the other rooms with electronic valvesuncontrolled radiators.
Note The uncontrolled radiators will continue to heat whenever the Genius Radiator Valves call for heat, this schedule is to bring them on without a controlled radiator also requesting heat.