There are up to 3 tests which can should be carried out to test that the Genius system has been installed correctly.
...
On the app, override one zone to 28°C. Ideally choose a room that has only 1 Radiator Valve.
- Click on the zone to override
- Change the mode icon at the top-right to the Override symbol (3 arrows)
- Ensure the override temperature is 28°C and the override duration should be 1 hour
- Check that the boiler Receiver Unit is active:
- A Single Channel Receiver shows a green light.
- Hold down the Heating button on the the Dual Channel Receiver (the light at the top-left with turn green for 2 seconds).
- A Single Channel Receiver shows a green light.
- Check the boiler fires as normal and the correct zone valve has opened.
Check that the central heating pipe from the zone valve or boiler gets hot.
Wait 10 minutes, then check the radiator in & out pipes and that each radiator is COLD cold not HOThot! (Except for the overridden zone).
Info This confirms all the valves are properly seated on the radiators, and they can turn the radiators off.
...
Override all of your heating rooms to 28°C.
Info .
Click on the 'My House' icon at the top left
- Tap 'Override' at the bottom of the screen
- Choose 'Select all'
- Ensure the override temperature is 28°C and the override duration should be 1 hour
- You must wait 10 minutes for all of the valves to wake up on their own.
- Check all the rooms receive the new set point temperature on the app. Each zone will have 'Set: 28'
Make sure the radiator valves have received the message by pressing any of the three buttons to light up the screen. Each valve should read the Override temperature, i.e. 28ºC.
Info - This confirms all of the valves have good communication with the Genius Hub.
- The radiators do not need to warm up. The valves can take up to 30 minutes to react when newly installed as they learn how far the pin needs to be opened.
...