The Genius system can control a wide variety of wet underfloor heating, both in terms of the configuration of the underfloor heating and the hardware that is already part of the underfloor heating system.
| Info |
|---|
Standard wiring diagrams are provided with the system. To download a copy of the wiring diagrams, visit: https://www.geniushub.co.uk/wiring |
Low Voltage/Volt free connections
...
The Single Channel Receiver is rated to 3A maximum. It can only be used to switch a zone valve, underfloor heating wiring centre or actuator and not a circulation pump. Controlling a circulation pump will result in damaging the receiver units, voiding the warranty! The Electric Switch is rated to 13A maximum.
Standard wiring diagrams are provided with the system. If you require any other wiring diagrams, please see the website.
| Info |
|---|
There is no requirement for a programmer to be connected to the underfloor heating wiring centre. All of the control should be done from the Heat Genius receiver units. See wiring diagrams provided by the underfloor heating manufacturer to confirm the wiring in this installation manual. |
...
| Warning |
|---|
Do not attempt to wire in your Receiver Unit if you are not 100% sure that you know what you are doing. Danger of electric shock! All wiring should conform to IEE regulations. The boiler, underfloor heating and wiring for the Receiver Unit must be electrically isolated before you commence work on wiring the Receiver Unit! |
...