Page History

...

• Off mode: For radiator zones, this puts the system into frost protect whereby the heating will only turn on for that zone if the measured temperature drops below the temperature displayed in the on-screen message. For On/Off and TPI Zones, this will turn the zones off and they will no longer call for heat under any circumstances.
  <image of off mode details in radiator room>
• Timer mode: The heating in the zone will follow a chosen schedule, as shown in the timer bars. You can change this schedule to suit your circumstances on a zone-by-zone and day-by-day basis. The settings you can choose from differ based on the type of zone you are viewing. To change the schedule for any day, click on the timer bar for the day you want to adjust.
  <image of timer mode details in radiator room>
• Footprint mode: In this mode the system will heat the zone based on whether the zone is normally used at this time, and if there is anyone currently using the zone. The timer bars are not clickable in this mode as the schedule is automatically created by your Genius Hub.
  <image of footprint mode details in radiator room> 
• Override mode:  This mode allows you to temporarily adjust the heating in the zone, by setting an override of a set temperature and duration. For On/Off zones, override switches the zone on for the duration set.
  <image of override mode details in radiator room>

Zone sub-menu

On the right hand side of the 'Zones' Current schedule / settings title bar is the zone details sub-menu. The sub-menu provides options to customise how information is displayed on the page or access other pages related to the one you are currently viewing, perform quick actions or change the setup of the zone you are viewing.

<image of my house zone details sub-menu, both the icon and the sub-menu with numbers> 

The standard options on the My House zone details sub-menu are:

• Zone Chart
• Zone Setup

More options may be displayed depending on the mode is active for the viewed zone.

Zone chart

The chart pages display the historical heating and occupancy data for the zone you are viewing.  For more information, please see the chapter on Charts. 

...

check_me

Zone setup

...