...
The following explains how to add a new Smart Plug to a Genius Hub.
Warning |
---|
If you have an existing Smart Plug it will need to be factory reset before it is connected to a Genius Hub. |
...
Troubleshooting step | |||||||||
---|---|---|---|---|---|---|---|---|---|
Now the Genius Hub needs to get ready to add the device.
|
Troubleshooting step | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Plug the Smart Plug into the wall socket within 2 meters (line of sight) of the Genius Hub (and turn the socket on). The red light will flash once every second. Press the clear/red button 3 times in within 1.5 seconds. The flashing red light stops flashing when the device has included successfully. On success, the Smart Plug has been assigned a number, write this number on the side of the device.
|
...
Troubleshooting step | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
...
Troubleshooting step | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Troubleshooting step |
---|
Locate the Smart Plug as necessary. See the following article for further advice: Positioning the Genius Hub Smart Plugs or Range Extenders |