Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • See the current temperature and heating in the zone.
  • Change the mode of the zone by clicking on the mode selector button on the at the top right of the page (under the menu).
  • See the weekly schedule / current settings for the zone.
  • Access the zone sub-menu for more features and settings.

Current temperature and heating

 On the left hand side of the zone pages (in the grey area) up to 2 pieces of information can be displayed:

...

  1. The measured temperature: This is the current temperature in the zone, and is displayed if the zone has a device which feeds the temperature back to the app (such as  a Room Sensor or Thermostat).
    • The colour of the measured temperature is an indicator as to whether the zone is calling for heat. If the temperature is blue, the zone is up to temperature and not calling for heat. When the measured temperature is orange, the zone is trying to heat up and so calling for heat (or on if it is an On/Off room). 
  2. The set temperature: The temperature the zone is currently controlling to.
    • For an On/Off zone, this will display whether the zone is currently on or off.

Anchor
ModeSelector
ModeSelector
Mode selector

The mode selector allows you to easily change the mode of a zone. 

...

To find out more about each of the modes available, see the relevant chapter.

Anchor
ActivityIcons
ActivityIcons
Activity icons

Directly underneath the mode selector are 2 activity icons, which are:

...

  • The pre-heat symbol: This symbol will light up when the room is heating due to the pre-heat settings, and greyed out otherwise. For more information on pre-heat, please see the 'Setup Pages' chapter.
  • The occupancy symbol: This symbol will change when occupancy is detected, and changes in different ways depending on the mode of the zone.
    • In Sense & Footprint Mode:
      • Greyed out: no occupancy detected
      • Hollow icon: occupancy detected, but the required amount of occupancy has not been detected to call the heating on
      • Solid icon: occupancy detected and a sufficient amount has been detected to call the heating on
    • In other modes:
      • Greyed out: no occupancy detected
      • Hollow icon: occupancy detected
    Info

    In Footprint Mode the occupancy symbol can be tapped to get more information on how much occupancy has been detected, and when the heating will turn on/off.


Anchor
CurrentSettings
CurrentSettings
Current settings / schedule

The detailed information for the zone is displayed under the mode selector. This changes based on the mode you have selected and the type of zone you are viewing. The main displays are:

...

  • Override mode:  This mode allows you to temporarily adjust the heating in the zone, by setting an override of a set temperature and duration. For On/Off zones, override switches the zone on for the duration set.

Anchor
ZoneSubMenu
ZoneSubMenu
Zone sub-menu

On the right hand side of the Current schedule / settings title bar is the zone sub-menu. The sub-menu provides options to access other pages related to the one you are currently viewing, perform quick actions or change the setup of the zone you are viewing.

...

More options may be displayed depending on the mode is active for the viewed zone. These will be described in the chapter for the relevant mode.

Zone Chart

The chart pages display the historical heating and occupancy data for the zone you are viewing.  For more information, please see the 'Charts' chapter.

Zone Setup

Setup pages allow you to change the configuration of a zone, such as its name, what devices are assigned to it and enable extra features such as pre-heating. For more information, please see the 'Setup pages' chapter.

...