...
- Always ensure that the boiler and wiring for the Single channel Receiver is electrically isolated before you commence work on any wiring.
- Remove the backplate from the Single Channel Receiver by loosening the 2 screws found on the bottom of the Receiver Unit.
- Mount the backplate onto the wall where the Single Channel Receiver is to be placed, or (if using an existing comaptible backplate) remove the front of the existing thermostat/receiver unit. This must be on a flat surface to ensure good contact between the Single Channel Receiver and backplate.
- Wire the Single Channel Receiver backplate as per the wiring diagrams provided, checking this is suitable as per the boiler installation manual.
Pagebreak - Fit the Single Channel Receiver onto the backplate by first fitting it to the top of the backplate and hinging the receiver unit down. This should hinge easily and should rest squarely on the backplate. If it does not attach easily first time, take the receiver unit off and try again.
- Tighten the screws underneath the Single Channel Receiver, and check the unit is securely and safely attached to the wall.
...