...
Troubleshooting step |
---|
Make sure that the Genius Radiator Valve is within 2 meters (line of sight) of the Genius Hub (the part that is connected to your Internet router). If the devices are not close enough together, then use either of the following steps: 1. Unmount the Genius Radiator Valve from the radiator. This video shoes how to remove and refit the Genius Radiator Valve. 2. Move the Genius Hub closer to the Genius Radiator Valve . The Genius Hub must have power and an Internet connection. This can be done by: a) Using a long Ethernet cable b) Plugging the Hub into a different Ethernet switch c) Using a Power Line Ethernet adaptor or WiFi booster which has an Ethernet port (see this link for how to connect the hub with a power-line Ethernet adaptor) |
Troubleshooting step | |||||||||
---|---|---|---|---|---|---|---|---|---|
Now the hub needs to get ready to add the device.
|
...
Troubleshooting step | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Press and release the middle /o\ button. The letters or numbers on the screen of the valve are not important at this point. The screen backlight should quickly flash, then slowly flash, then stop flashing when the device has included successfully. On success, the Genius Radiator Valve has been assigned a number, write this number on the side of the device.
|
Troubleshooting step |
---|
If not already, re-install the Genius Radiator Valve onto the radiator. |
Troubleshooting step | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Now pick a zone to assign the Genius Radiator Valve to.
|
...
Troubleshooting step | |||||||||
---|---|---|---|---|---|---|---|---|---|
|
...
Troubleshooting step | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Troubleshooting step | |
---|---|
First locate the Genius Radiator Valve which has been re-added Genius Hub. You need to use the original ID number of the device, and not the one which it currently has.
|
...
|
Troubleshooting step | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
First the Genius Hub needs to attempt to communicate with the Genius Radiator Valve once more. This is to ensure that the device is a 'dead node' and so is eligible to be removed from the system in this way.
|
Troubleshooting step | ||||||
---|---|---|---|---|---|---|
Now the device is confirmed as no longer on the system, it can be removed.
|
...
|
...
|