...
The main difference between Timer mode in Radiator, Underfloor heating or Hot Water Temperature zones compared with On/Off zones is that you can set a temperature for these types of zone. In On/Off zones you can only set periods where the heating is on or off.
Note |
---|
Sense mode is only available The 'react to occupancy' will only work in zones with a Room Sensor, or Occupancy Trigger channel assigned to them. |
...
If you wish to view a day's schedule in more detail, click on the day you wish to view. This will load the details of the heating schedule including the default temperature and a list of the heating periods.
Enabling Sense Mode
Note |
---|
Sense mode is currently available for free during its BETA phase. |
To use Sense Mode
- Log into one of your Genius Hub
- Click on the Main Menu, followed by 'Settings'
- Choose 'Beta Features' and tap the toggle for 'Sense Mode'
- The 'Timer' mode option has now been replaced with 'Sense' mode
Anchor | ||||
---|---|---|---|---|
|
Adding a Timer period
With the Genius Hub system you can set as many heating periods as you require throughout the day.
...
Info |
---|
For an On/Off zone, the period will automatically be set to 'ON', and this cannot be changed. |
Anchor | ||||
---|---|---|---|---|
|
If your schedule changes or the temperature in a room is not right for you, it is easy to change a Timer period.
...
- From the My House page, click on the zone you wish to edit.
- Ensure the zone is in Timer mode.
- Click on the day you want to change the schedule of.
- Click on the Timer period you want to change.
- Click on the relevant option you want to change, e.g. the end time.
- Change the option to its new setting.
- Click OK.
Anchor | ||||
---|---|---|---|---|
|
If your schedule has changed significantly, you may wish to delete a Timer period.
...
Note |
---|
There is no way to recover a Timer period, so ensure you are deleting the right one. |
Anchor | ||||
---|---|---|---|---|
|
For those times of day which you do not want the heating on high, you can set a default temperature, so that the room doesn't cool down too far, leaving you to return to a cold house or causing the room to take a long time to heat up again. Default periods cannot be reactive. If you want a zone to react throughout the day, you will need to create timer periods to cover all of the 24 hour period.
...
There is no configurable Default setting for On/Off zones. The zones are off by default and the Timer periods are always On.
Advanced options
For the following options, see the relevant sections of Timer Mode:
...
Panel | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||
Related Information:
|
...