Page History

...

Overriding multiple zones

If you want to override multiple zones at one time, to the same temperature and for the same duration this can be done from the My House page.In  In this menu you can select multiple zones of the same type (e.g. Radiator or Radiator or On/Off). For  For more information, see the the My House House chapter. 

Anchor
ManualOverride ManualOverride

Override from the device

...

For more information on setting up the manual Override, see the the 'Setup pages' chapter chapter.

To set an override from a device:

• On the the Room Thermostat (DA-WRT-C) you  you can set the temperature of the override from the device. To override a zone from the thermostat:
  • Press the up or down button until the desired temperature is reached. The zone will now override to the set temperature for the duration set on the app.
  • Alternatively, the override duration can also be specified on the device by pressing the top button after selecting the override temperature.
    
• On the Room Thermostat (DA-WRT-B) you can set the temperature of the override from the device. To override a zone from the thermostat:
  • Rotate the dial until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
    Image Modified
• On a a Radiator Valve (DA-WRV-C, DA-WRV-B, or DA-WRV-A) you can set the temperature of the override from the device. To override a zone from the Radiator Valve:
  • Press the up or down button until the desired temperature is reached. The zone will override to the set temperature for the duration set on the app.
    Image Modified
• On the the Single Channel Receiver (HO-SCR-C) you  you can trigger an from the device. To override a zone from the receiver unit:
  • Press the On (top) button. The system will use the override duration set on the app for this zone, and override to the last setting or 21°C.
    Image Modified
• On the the Dual Channel Receiver (HO-DCR-C) you  you can trigger an from the device. To override a zone from the receiver unit:
  1. Check the door panel to see which of the white buttons relates to the zone you have chosen to override.
  2. Press both the correct white button and the green button at the same time. The system will use the override duration set on the app for this zone, and override to the last setting or 21°C.
     
• On the the Electric Switch (HO-ESW-D) you  you can trigger an override from the device. To override a zone from the Electric Switch:
  • Press the button at the bottom right hand corner of the receiver unit.
   The
  • The system will
  use the
  • override
  duration set on the app for this zone, and override to the last setting or 21°C
  • to a duration (30, 60 or 120 minutes) depending on how many times it is pressed.
  • Image Modified
• On the the Smart Plug (PH-PLG-C, PH-PLG-D or PO-PLG-B) you can trigger an from the device. To override a zone from the receiver unit:
  • When the plug is off, press the button in the middle of the plug. The system will use the override duration on the app for this zone, and override to the last setting or 21°C.
    Image Modified
    
    

...