An introduction
From time-to-time you may want to change one of the background settings in a zone, and the setup pages are where you can do this. These pages give you the option to make changes to how the heating works, such as do you want your zones pre-heated, what happens if you press a button on a device in that zone or adjust how sensitive the Room Sensor is to detecting occupancy. The options you can see on the zone setup pages are dependent on the type of zone and which devices are in the zone.
...
- On the Smart Plug (PH-PLG-C or PO-PLG-B) you can trigger an from the device. To override a zone ON from the receiver unit:
- Press the button at the bottom left hand corner of the receiver unit. The system will use the override duration and override temperature set on the app for this zone.
- <image of HO-ESW-D, buttons highlighted> check_me - all of above
| Info |
|---|
In an On/Off zone, you can override the zone, but only by switching it On or Off. The On and Off buttons on the Single and Dual Channel Receivers and the buttons on the Electric Switch and Smart Plugs can be used to override their respective zones. |
...
To put an offset into a zone on the app:
- Scroll to the 'Temperature offset'
- Move the slider to the desired number and the offset will be applied.
...
- Scroll to 'Zone Devices'
- Click on the + symbol to expand the list
- Click on the Bin icon next to the device you no longer want assigned to the zone to remove the device from the zone
...
| Info |
|---|
This will only remove the device from the zone, the device will remain linked to your system so it can be assigned to another zone. |
Quick action bar
The more commonly performed tasks on the setup pages are located on the action bar found at the bottom of the screen.
<image of quick actions>
- The Assign device: This action allows you to assign a device, already linked to your system, to this the zone you are currently viewing.
- When you click on Override the Genius system will ask you which zones you would like to override. You can choose just one zone or multiple zones. To select all of the zones, click on the link at the top of the list. check_me
- Next, select the temperature to you wish to set in the selected zones. This temperature can be higher or lower than the schedules temperature in the zone, so you can use this feature to turn the heating off early if you are leaving the house earlier than usual.
- Now you need to choose the how long the override is to affect the selected zones. This can be set from just 5 minutes to 24 hours, and so can be used so give the room a boost on those colder days or turn the heating off if you are going out for the day.
- The Restore action cancels either the Override or the Off action which is set in the zones and reverts the selected zones back to their previous mode. This means that if you turn your heating to 'Off' over the Summer, you can just click 'Restore' to put your heating back on for the Winter.
- To assign a device:
- Click on 'Assign device'.
- Find the number of the device you want to assign to the room (this may be printed on a sticker on the device)
- Click on the correct device and 'Finish'. check_me
- <image of 'assign new device dialog' and finish button>
- Link to zone: This links the zone you are viewing to 1 or more other zones. For more information on linking, please see the Linking chapter replace_me. to link a zone:
- Click on 'Link to zone'
- Select all of the zones you wish this zone to follow the schedule of.
- Click 'Link'
- Delete this zone: If you no longer require a zone (for example if you no longer wish to schedule a Smart Plug) you can remove it from the app by clicking this buttonThe Off action turns all of your heating zones to Off mode.